BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors
This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts
Page 1 of 1